Why white UV ink goes in the black channel
In compatible ProCart sets, white-fluorescing UV ink goes in the K position instead of ordinary black ink. K identifies a printer channel. It does not describe the colour seen under UV. A white pixel in an RGB image is usually left unprinted, so it is different from white UV ink.
Prepare the printer and the image
Check the exact Epson model and cartridge compatibility. In four-colour sets use white UV in K, cyan in C, magenta in M and yellow in Y. Use light cyan and light magenta only in the matching LC and LM positions of compatible six-colour systems. Follow model-specific instructions for printers with extra black positions. Keep ordinary and UV ink separate. Never open or refill single-use prefilled cartridges.
- Keep the original and work with an RGB copy. Export text, logos or QR codes as an image at the intended print size, preferably around 300 ppi.
- Adjust Master Hue to +140° without changing Saturation or Lightness.
- Invert the image after adjusting the hue. Save it separately, or let our converter apply both steps and export a PNG. Convert the original only once.
- Print a small sample in colour on inkjet paper without optical brighteners (OBA). Inspect the sample in normal light and under a 365 nm UV-A lamp. If it contains a QR code, test it with the intended reader.
This method prepares the file. The printer, driver settings and paper affect the final result.